Table of Contents
Advertisement
Battery Installation
1. Press the catch and remove the battery cover.
2. Install new ones (AAA). Ensure that you have the
batteries' polarity (+/−) aligned correctly.
3. Slip the cover back over the batteries until it snaps
into place.
NOTE:
• Do not mix different types of batteries or new and old batteries.
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not short, heat, or take apart batteries.
• Do not throw batteries into fire.
• If you will not be using the remote control for a long time, remove the batteries.
• Ensure that you have the batteries' polarity (+/−) aligned correctly.
• Do not use new and old batteries together, or use different types of batteries together.
• Dispose of used batteries according to your local regulations.
• Please note that if multiple projectors are installed nearby, other projectors may unintentionally
light up when you turn on the power using the remote control.
1. Check the product overview, supplied items and part names
15
2
1
1
2
Advertisement
Table of Contents
Troubleshooting
