NEC PA1705UL-W Installation Manual page 61

Selecting Default Source
You can set a source as the default source so that it will be displayed each time the projector is
turned on.
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button to select [SETUP] and press the ▼ button or the ENTER button to select
[MENU(1)].
3. Press the ▶ button to select [SOURCE OPTIONS] and press the ▼ button or the ENTER
button.
4. Select [DEFAULT INPUT SELECT] and press the ENTER button.
The [DEFAULT INPUT SELECT] screen will be displayed.
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
7. Restart the projector.
The source you selected in step 5 will be projected.
2. Projecting an Image (Basic Operation)
26