NEC PA1705UL-W Installation Manual page 44

Terminal Panel Features
4
9
1. HDMI 1 IN Terminal (Type A)
Connects to the output terminals of a com-
puter, blu-ray player, etc.
2. HDMI 2 IN Terminal (Type A)
Connects to the output terminals of a com-
puter, blu-ray player, etc.
3. SDI IN Terminal (BNC)
Connects to the SDI output terminal on the
video device.
4. HDBaseT IN Port (RJ-45)
Connects to a commercially available HD-
BaseT compatible transmission devices.
Also used when connecting multiple projec-
tors in daisy chaining.
5. HDBaseT OUT Port (RJ-45)
Outputs incoming signals from the HDMI
1 IN terminal, HDMI 2 IN terminal, and
HDBaseT IN Port.
1. Check the product overview, supplied items and part names
1 2
10 6
5
6. AUDIO OUT Mini Jack (Stereo Mini)
Outputs the audio signal corresponding to
the image projected from the projector. The
output volume can be adjusted using the
◀ / ▶ buttons.
7. USB Port (Type A)
Connect a commercially available USB
mouse and use it to navigate the menu.
NOTE:
• Not guarantee the performance of all USB mouse avail-
able on the market.
8. LAN Port (RJ-45)
Connects the unit to a wired LAN.
9. PC CONTROL Port (D-Sub 9 Pin)
Use this port to connect a PC or control
system. This enables you to control the pro-
jector using serial communication protocol.
9
3 7
8