NEC PA1705UL-W Installation Manual page 42

Controls/Indicators
2
1. (POWER) Button
Switches between projector's power on and
standby.
When turning off the power (standby),
pressing the button once will bring up a
confirmation message on the screen, so
press the button one more time.
2. POWER Indicator
Indicates the projector's power state. The
indicator lights up in blue when the power is
on. Depending on the state of power, it will
light up or blink in either green or orange
when power is off. Refer to the "Indicator
Message" section for details.
(→ page 17, 20, 37, 191)
3. STATUS Indicator
This lights up or blinks when an operation
button is pressed while the unit is in key
lock mode, while the lens is calibrating, etc.
Refer to the "Indicator Message" section for
details.
(→ page 191)
4. LIGHT Indicator
Indicates the state of the light source.
1. Check the product overview, supplied items and part names
3 4 5
11 12
1
6
9
7
5. TEMP. Indicator
Indicates high temperatures around the
projector.
6. INPUT Button
Selects the input signal. Pressing it quickly
will display the input selection screen. Press-
ing it for one second or longer will begin a
series of automatic checks in the order of
HDMI1 → HDMI2 → HDBaseT → SDI, and if
an input signal is detected then that signal
will be projected.
7. MENU Button
Displays the on-screen menu for various
settings and adjustments.
8. ▲▼◀▶ / Volume Buttons ◀▶
• When the on-screen menu is displayed,
use the ▼▲◀▶ buttons to select the item
that you wish to set or adjust.
• Changes the pattern when the test pat-
tern is displayed.
• When the on-screen menu is not dis-
played, use the ◀ / ▶ buttons to adjust
the sound output from the projector.
7
13
8
10