NEC PA1705UL-W Installation Manual page 169

Extron XTP Set for connecting this projector to the Extron XTP transmitter.
[ON] will enable to connect with the XTP transmitter.
[OFF] will disable to connect with the XTP transmitter.
PC CONTROL Set the PC control function to on or off.
[ON] will enable the PC control function.
[OFF] will disable the PC control function.
AUTH. PC CONTROL Set PC control function using authentication to on or off.
[ON] will enable the PC control function with authentication using the user
name and password registered at [ACCOUNT].
[OFF] will disable the PC control function with authentication.
NOTE:
• This function is for future expansion. Security can be improved by using
Art-Net Art-Net is a communication protocol for transmitting and receiving DMX512
over an Ethernet network.
Configure the settings for controlling the projector using the Art-Net controller.
Art-Net
[2.X.X.X],
[10.X.X.X]
SETTINGS
CHANNEL
• The function and DMX value set for each channel can be checked in [INFO.].
• See "Art-Net DMX Parameter List" (→ page 201) for the DMX parameters.
together with an application compatible with the authentication function.
For specifications related to the authentication procedure required by the
application software, please visit our web site.
https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html
Turns on or off Art-Net.
Automatically calculates the IP address according to the
Art-Net specifications and overwrites it to the current
wired LAN settings (IP address, subnet mask).
Sets DMX Universe and start channel used by the
projector.
Selects projector functions to be assigned to channels
1 thru 12. To temporarily disable the assigned function,
select [LOCK] to set the parameter to a non-operable
value.
134
5. Using On-Screen Menu
—
—
—
—