Turning On The Projector - NEC PA1705UL-W Installation Manual

2-3. Turning on the Projector

WARNING
The projector produces a strong light. When turning on the power, operate from the side or rear
of the projector (outside the hazard zone). Also, when turning on the power, make sure no one
within the projection range is looking at the lens.
1. Remove the lens cap.
2. Press the (POWER) button on the projec-
tor cabinet or the POWER ON button on the
remote control.
The POWER indicator lit in green will start
to blink in blue. After that, the image will be
projected onto the screen.
TIP:
• When the message "PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD." is displayed, it means that the [SECURITY]
feature is turned on.
After you turn on your projector, ensure that
the computer or video source is turned on.
NOTE:
• A blue screen (blue background) is displayed when no signal is
being input (by factory default menu settings).
2. Projecting an Image (Basic Operation)
22