NEC PA1705UL-W Installation Manual page 183

3. Gently pull the lens unit out from the pro-
jector.
Once the lens unit has been removed, attach
the rear lens cap included with the lens unit
before storing.
4. Attach the lens cover to the projector.
(1) Leave a gap of about 2 cm when attaching
the lens cover.
(2) Push it in the direction of the arrow.
* When not attaching a lens unit, attach the dust
cap supplied with the projector.
Align the dust cap with the projector body, place
the lower section on the projector, then push the
surrounding area.
The bottom side of the dust cover is the side
with the longer flat area.
6. Attachment/detachment of parts sold separately
148
a
a: Lens cover