NEC PA1705UL-W Installation Manual page 56

Using the power cord stopper
To prevent the power cord from accidently removing from the AC IN of the projector, use the power
cord stopper.
NOTE:
• If you pull on the power supply cord while the connector is fixed, the main unit may fall down and be damaged
① With the clamper facing the power supply cord, align the tip of the power supply cord stopper
with the hole below the AC IN terminal and push it in.
② Pass the power supply cord through the clamper and press the clamper to fix it.
③ Slide the clamper until the base of the power plug.
a
2. Projecting an Image (Basic Operation)
a
a: Clamper
21
a