After Use - NEC PA1705UL-W Installation Manual

2-8. After Use

1. Unplug the power cord.
① Pull to an appropriate position while pushing down the knob of the power cord stopper.
② Press down the knob on the clamper to open the clamper and take out the power cord.
a: Clamper / b: Knob (power cord stopper) / c: Knob (clamper)
2. Disconnect any other cables.
3. Mount the lens cap on the lens.
4. Before moving the projector, screw in the tilt foot if they have been lengthened.
b
36
2. Projecting an Image (Basic Operation)
a
c