NEC PA1705UL-W Installation Manual page 113

Using the character input screen
Highlight the item for text input and press the ENTER button to bring up the character input screen.
1. Press the ▼▲◀▶ buttons to highlight a character and then press the ENTER button.
The character will be entered.
Do the following for non-character items.
Item
Toggles between displaying characters or an asterisk in the
text box.
Toggles between upper case, lower case, and special charac-
MODE
ters.
SPACE Inserts a space.
BACKSPACE Deletes the character to the immediate left of the cursor.
Switches the character to be entered. Example: 1→ A→B→C
Confirms the characters that have been entered and closes the
OK
character input screen.
Deletes the characters that have been entered and closes the
CANCEL
character input screen.
Characters can also be input without moving the highlighting by pressing the buttons on the
remote control (0-9).
Check the operations guide display to see which buttons on the remote control correspond
with which items on the character input screen.
2. After inputting characters, use the ▼▲◀▶ buttons to focus on either OK or the text box,
then press the ENTER button.
The characters that have been entered will be confirmed, and the character input screen will close.
a
b
c
a: Text box / b: Highlight / c: Operation Guide
Function
78
5. Using On-Screen Menu
Corresponding
button on the
remote control
—