NEC PA1705UL-W Installation Manual page 132

Selecting Overscan Percentage [OVERSCAN]
Select overscan percentage (Auto, 0%, 5% and 10%) for signal.
NOTE:
• The [OVERSCAN] item is not available:
- when [NATIVE] is selected for [ASPECT RATIO].
Selecting the Aspect Ratio [ASPECT RATIO]
Use this function to select the screen's lateral:longitudinal aspect ratio.
The projector automatically identifies the signal being input and sets the optimum aspect ratio.
For Computer signal
Options
AUTO
NORMAL
4:3
5:4
16:9
15:9
16:10
Projected image
Overscaned by 10%
The projector will automatically determine the incoming signal and display it in its aspect ratio.
The projector may erroneously determine the aspect ratio depending on its signal. If this occurs,
select the appropriate aspect ratio from the following.
The image is displayed in its original aspect ratio of its input signal.
The image is displayed in 4:3 aspect ratio.
The image is displayed in 5:4 aspect ratio
The image is displayed in 16:9 aspect ratio
The image is displayed in 15:9 aspect ratio
The image is displayed in 16:10 aspect ratio
For HDTV/SDTV signals
Function
97
5. Using On-Screen Menu