System Health And System Id Indicator Codes - Dell PowerEdge R860 Installation And Service Manual

Table 102. Status LED indicators and descriptions (continued)
Icon Description

System health and system ID indicator codes

The system health and system ID indicator is located on the left control panel of the system.
Figure 177. System health and system ID indicator
Table 103. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
210 System diagnostics and indicator codes
Condition Corrective action
If the problem persists, see the
Getting help section.
NOTE: For more information about the
supported PCIe cards, see the Expansion cards
and expansion card risers > Expansion card
installation guidelines section.
Condition
Indicates that the system is powered on, is healthy, and
system ID mode is not active. Press the system health and
system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem
persists, see the Getting help
Indicates that the system is experiencing a fault. Check
the System Event Log for specific error messages. For
section.