Table of Contents
Advertisement
Figure 55. Configuration 3: 16 x 2.5-inch (SAS4/SATA) + 8 x 2.5-inch NVMe with fPERC 11
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 71. 16 x 2.5-inch (SAS4/SATA) + 8 x 2.5-inch NVMe with fPERC 11
Order
From
1
CTRL_SRC_SB1 (fPERC controller connector)
2
SL4_CPU1_PA3 (signal connector on system board)
3
SL3_CPU2_PA2 (signal connector on system board)
4
SL6_CPU1_PA4 (signal connector on system board)
5
SIG_PWR_2 (system board power connector)
6
SIG_PWR_1 (system board power connector)
7
SIG_PWR_3 (system board power connector)
8
SL14_CPU4_PA2 (signal connector on PEM)
9
SL17_CPU3_PA4 (signal connector on PEM)
To
BP_DST_SA1 (backplane signal connector)
CTRL_DST_PA1 (fPERC controller connector)
DST_PA2 (backplane signal connector)
DST_PB2 (backplane signal connector)
BP_PWR_1 (backplane power connector)
BP_PWR_1 (backplane power connector)
BP_PWR_1 (backplane power connector)
DST_PA1 (backplane signal connector)
DST_PB1 (backplane signal connector)
Installing and removing system components
95
Advertisement
Table of Contents
