Inventory - Spectra Logic Spectra 12000 User Manual

20 Remote Library Controller User Guide

Inventory

Note: Opening and closing the Entry/Exit (E/E) port is not
possible using the RLC. This function is disabled because
of possible damage that may occur if the E/E port is
opened off site.
To move a data tape from one location to another location:
1. From the General Status screen select Media, or select the General
toolbar, and then select the Inventory icon. The Inventory screen
displays (Figure 2-1).
Figure 2-1 The Inventory Screen.
2. Select the partition that contains the tape you would like to move
from the Partition drop down menu.
3. Select the Go button next to Partition.