Spectra Logic Spectra 12000 User Manual page 44

44 Remote Library Controller User Guide
Caution: If you select a QIP to update, you can update all
QIPs of that type by selecting the Update all QIPs of same
type box. However, if that box is selected all QIPs must be
idle.
8. Select Update Firmware to update this component.
9. Repeat Step 5 through Step 8 for each component you want to
update.
Edit or Remove Firmware Severs
1. From the RLC, select Maint. The Maintenance toolbar displays.
2. Select the Update F/W button. The Update Firmware screen displays.
3. Select Edit Servers, the Edit Firmware Servers screen displays
(Figure 4-2).
Figure 4-2 The Edit Firmware Servers screen.