Spectra Logic Spectra 12000 User Manual page 21

4. Select the pack where the tape you want to move is located from the
Pack pull down menu.
5. Select the Go button next to Pack.
6. Select the specific slot location you want to move a tape from, that
tape will appear under Move from: in the Move Tapes section.
7. Select the slot location to where you want the tape moved, that slot
location will appear under Move to: in the Move Tapes section.
8. Select Move to complete the move. A window will appear letting you
know the move is taking place.
Figure 2-2 The Inventory screen (Library 1).
You can move tapes to different tape slots, to the E/E port slots, to
specific drives, or bulk load all the tapes in the E/E port slots to the slots
of the selected partition by using the Bulk Load button.
Chapter 2. General 21