Configuring F-Qips - Spectra Logic Spectra 12000 User Manual

36 Remote Library Controller User Guide
Note: When configuring the library as one logical library,
one bus on any QIP must have the option Exports a
Logical Library enabled to provide the robotics control
interface to a host. The Exports a Logical Library check
box indicates that this bus is the one that will be assigned
to control robotics
When partitioning the library into more than one logical
library, each of the partitions must have one QIP bus
export a logical library for robotics interface. The bus
which exports a library must also be configured so that
the QIP SCSI ID is unique from all drives on the QIP bus,
and any device on the host bus it is attached to.
4. Select Save Changes to save the new configuration.

Configuring F-QIPs

The RLC allows the user to configure Fibre Channel controllers (F-QIPs).
To configure F-QIPs:
1. From the RLC, select the Configuration toolbar.