Finish - Spectra Logic Spectra 12000 Supplementary Manual

Return the library to service
1. Return the library to its normal operating location.
Warning: The library is heavy. Get help moving the library.
Caution: If the host computer or other equipment was restarted while the library was
2. Switch on AC power at the rear of the library.
3. Restart the host system.
4. Enable your backup software.
5. In the Gator Control Panel, tap Toolbars, then tap Configuration. The Configuration
toolbar displays.
6. Select Controller. The Controller Configuration screen appears.
7. Set the configurations for each QIP. Use the configurations you noted on page 7.
You have now completed the 270-pin to 300-pin passive QIP upgrade.
If you need further assistance, call Spectra Logic at 800-227-4637.
Page 22
away, you must exit all programs and shut down all equipment before
reconnecting the library.
Figure 37.
The Controller Configuration screen.
P.N. 90910883

Finish