Setting The Welding Parameters - Fronius TPS/i COMPACT Operating Instructions Manual

13
The set filler metal is saved.
*
Setting the
welding para-
meters
1
2
3
4
The amended parameter values are applied immediately.
If one of the wire speed, material thickness, welding current or welding voltage
84
Press the right adjusting dial
The previous item can be called up by turning the right adjusting wheel
and selecting "back".
22.8 5O.O
1
Press the button until the desired welding parameter lights up
Material thickness
Welding current
Wire speed
Special function
Turn the left adjusting dial to change the value of the welding parameter
If necessary:
press the button until the desired welding parameter lights up
Arc length correction
Welding voltage
Pulse/dynamic correction
Special function
Turn the right adjusting dial to change the value of the welding parameter
4
2
3