Connecting The Welding Torch; Inserting/Replacing Feed Rollers - Fronius TPS/i COMPACT Operating Instructions Manual

Connecting the
1
welding torch
2
3
Inserting/repla- In order to achieve optimum wire electrode feed, the feed rollers must be suit-
cing feed rollers able for the diameter and alloy of the wire being welded.
NOTE!
Only use feed rollers that match the wire electrode.
An overview of the feed rollers available and their potential application areas can
be found in the Spare Parts Lists.
Danger from feed roller holders flying upwards.
This can result in injuries.
▶
1
Before connecting the welding torch, check that all cables, lines and hosep-
acks are undamaged and properly insulated.
Open the wire-feed unit cover
CAUTION!
When unlocking the lever, keep fingers away from the area to the left and
right of the lever.
3
2
2
67