Technical Data - WAGO LONWORKS 750-319 Manual

Modular i/o system
Table of Contents

Advertisement

3.1.9 Technical Data

System data
No. of nodes
Transmission medium
Max. length of fieldbus segment
Topology
Baud rate
Buscoupler connection
Standards and approvals
UL
Conformity marking

Technical data

Max. number of I/O modules
digital signals
analog signals
Config. possibility
Voltage supply
Input current
Efficiency of the power supply
Internal current consumption
Total current for I/O modules
Isolation
Voltage via power jumper contacts
Current via power jumper contact
Transceiver
Dimensions (mm) W x H x L
Weight
EMC Immunity to interference
EMC Emission of interference
Modular I/O System
®
L
W
ON
ORKS
max
max
Fieldbus coupler/controller
Fieldbus coupler 750-319
64 without repeater, 127 with repeater
Twisted Pair - FTT
free topology 500 m,bus topology 2700 m
in accordance with LON specification
78 kbps
2-pole male connector, series 231 (MCS)
female connector (231-302) is included
E175199, UL 508
CE
62 per node
max. 248 (Inputs and Outputs)
max. 124 (Inputs and Outputs)
via PC with LON interface
DC 24 V (-15 % / + 20 %)
500 mA at 24 V
87 %
300 mA at 5 V
1700 mA at 5 V
500 V system/supply
DC 24 V (-15 % / + 20 %)
DC 10 A
FTT 10 A
51 x 65* x 100 (*from top edge of mounting rail)
ca. 180 g
acc. EN 50082-2 (96)
acc. EN 50081-1 (93)
• 59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lonworks 750-819

Table of Contents