Table of Contents
Advertisement
5. Under "Online" click on the "Log-on" menu point to log into the controller.
6. If there is not a program in the controller, a window appears asking whether
7. As soon as the program is loaded, you can start program via the "Online"
8. To terminate the online operation, return via the "Online" menu and click
3.2.8.2.2 Transmission via the fieldbus
The field bus cable is the physical connection between the PC and the control-
ler.
In TOPLON
Menue "WAGO-I/O-PRO\Download IEC 61131 Application".
Fig. 3-8: Main view TOPLON
Modular I/O System
®
L
W
ON
ORKS
Note
To be able to access the controller, ensure that the operating mode switch
of the controller is set to the center or the top position.
(The WAGO-I/O-PRO 32 server is active during online operation. The
communication parameters cannot be polled.)
or not the program is to be loaded.
Confirm with "Yes".
Subsequently the current program will be loaded.
menu, menu point "Start".
At the right-hand end of the status bar, the system signals "ONLINE
RUNNING"." gemeldet.
on the "Log-off" menu point.
®
PRIO the transfer of the IEC 61131 programm take place via
Fieldbus coupler/controller
®
PRIO
• 83
Review
g012377e
Advertisement
Table of Contents
