Table of Contents
Advertisement
TOPLON® PRIO
WAGO TOPLON® PRIO is a comfortable, easy to use plug-in for your
LNS based Network Management Tool Software.
The plug-in TOPLON® PRIO forms the interface between the LON fieldbus
coupler/controller and the LON network.
With TOPLON® PRIO you can directly connect network variables to the in-
formation of your network node, and then send, receive or link same via the
LON network. As an additional feature, WAGO TOPLON
freely select the standard network variables type of the individual network
variable.
The abbreviation PRIO means "Programmable Remote I/O".
TP/FT-10
Abbreviation for transceiver twisted pair free topology TP/FT-10, which is
the most common transmission medium. The TP/FT-10 channel permits both
the line bus topology, as well as free topology. As a line bus again 64 sub-
scribers can be connected to a segment up to a length of 2700 m. The trans-
mission rate amounts to 78 kBit/sec. In a free topology, the network can be
extended to up to 400 m with 64 units.
TP/FT-10 allows the greatest degree of freedom in terms of space.
Transceiver
Transceiver are bus coupler modules between Neuron chip and transmission
medium. The most important representatives are TP/FT-10 and the LPT-10.
In addition, transceiver are available for radio transmission or for coupling
with LWL systems.
Twisted Pair
Pairwise twisted wire (short notation: TP).
W
WAGO-IO-PRO 32
WAGO-I/O-PRO is a programming and visualization tool, allowing users to
develop PLC applications for the Programmable Fieldbus Controller of the
WAGO-I/O-SYSREM 750 Series. It allows testing, debugging and startup
of the application program.
WAGO-I/O-SYSTEM
The WAGO-I/O-SYSTEM 750 consists of various components, which are
capable of providing modular and application specific fieldbus nodes for
various fieldbusses.
WAGO-I/O-SYSTEM 750
Busklemmen
Glossary • 141
®
PRIO permits to
Advertisement
Table of Contents
