Resetting Default Commands; Listening To Current Commands - Sony Ericsson T606 User Manual

4 The phone will prompt you to train each word
within that group.
5 If the function associated with the command group
is dependent on another command, you will be
prompted to train those commands too.
Note: You can exit group training at any time without losing
the commands you have just trained.Training All
Commands
Training All Commands
1 Scroll to ,
Settings Select
.
VoiceCommands
2 Press and choose
Train All
3 The phone will prompt you to train each word.

Listening to Current Commands

1 Scroll to ,
Settings Select
,
Manage Commands
2 Choose a group of commands.
3 As you scroll through the list, the commands will
be played back to you. If a command has not been
, , highlight
Voice Control
.
, , ,
Voice Control Select
.
Select
Draft for Sony Ericsson -- Preliminary Copy
recorded, the command will be spoken via a pre-
recorded voice.
Note: If there is only one word for the selected command
group, press

Resetting Default Commands

There are three ways to reset commands:
Resetting Single Commands
1 Scroll to ,
Settings Select
,
Manage Commands
2 Choose a group of commands.
3 Select the word you want to reset.
4 Press and choose
5 Confirm your selection.
Resetting Command Groups
1 Scroll to ,
Settings Select
,
Manage Commands
2 Highlight to the command group you want to reset.
3 Press and choose
4 Confirm your selection.
Using Voice Control
and choose .
Play Cmnd
, ,
Voice Control Select
.
Select
.
Reset Cmnds
, ,
Voice Control Select
.
Select
.
Reset Group
,
,
53