substances, always pay attention to the General Laboratory Precautions. If necessary,
contact your safety officer!
•
It is prohibited to run the centrifuge, with rotors not manufactured for this unit.
•
Under no circumstances open the lid of the centrifuge, while the rotor is still running or
rotating with a speed of > 2m/s.
1.7.4 Following Rules Must Strictly be Adhered To:
•
Do not operate the centrifuge if not installed correctly.
•
Do not operate the centrifuge when dismounted (e.g. without housing).
•
Do not run the centrifuge, if mechanical or electrical assembly groups have been tampered
with, by unauthorized personnel.
•
Do not use accessories such as rotors and adapters, that are not approved by HERMLE
Labortechnik GmbH, except commercially available centrifuge tubes, made of glass or
plastic.
•
Do not spin extremely corrosive substances, as they may cause material damages and impair
mechanical resistance.
•
Do not operate the centrifuge with rotors or adapters, which show any signs of corrosion or
mechanical damage.
The manufacturer is responsible for safety and reliability, of the centrifuge, only if:
•
The unit is operated in accordance to this instruction manual.
•
Modifications, repairs or other adjustments are performed by HERMLE-authorized personnel
and the electrical installation of the related location corresponds to the IEC-regulations.
© Hermle Labortechnik GmbH
Z207H_V1.22_eng
PRODUCT DESCRIPTION
7