Temperature Indication; Signal Turn On / Off (Optional) - Hermle Z 207 MK User Manual

Table of Contents

PRODUCT DESCRIPTION

Figure 7

1.8.3 Temperature Indication

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key "accel/decel" (5).

In the display, "accel/decel" (A-2) appears the word, "service". Select the letter, "C", with the control

field (1). As a result, appearing in the display, "rpm/rcf" (A-1) are the words, " °C ". By pressing the

key, "rpm/rcf" (4), the word " C/tEmP " flashes, this allows you to change the display into Fahrenheit

" °F ", with the control field (1), (see Figure 8).

After the settings have been stored by user (see 1.8.2), the normal program mode can be changed

back again by switching off the centrifuge, for a short period.

Figure 8

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key; "accel/decel"

(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter, "L" with the

control field (1). As a result, appearing in the display "rpm/rcf" (4), are the words, "On Sound". By

pressing the key, "rpm/rcf" (4), the word "On" flashes, and the sound can be switched off with the

control field (1), (see Figure 9).

After the settings have been stored by user, the normal program mode can be changed back again

by switching off the centrifuge, for a short period.

Z207MK_V1.21_eng

Table of Contents

Show Quick Links

Table of Contents