Temperature Indication; Sound Signal Turn On / Off - Hermle Z 366 K User Manual

Table of Contents

1.8.2 Temperature Indication

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key "accel/decel" (5).

In the display, "accel/decel" (A-2) appears the word, "service". Select the letter, "C", with the

adjustable knob (1). As a result, appearing in the display, "rpm/rcf" (A-1) are the words, "CELSI/temp".

By pressing the key, "rpm/rcf" (4), the word "CELSI" flashes, this allows you to change the display into

Fahrenheit "FAREN", with the adjustable knob (1), (see Figure 4).

After the settings have been stored by user, the normal program mode can be changed back again by

switching off the centrifuge, for a short period.

Figure 4

Proceed as illustrated, under point 1.8.1, to enter this program mode, press the key; "accel/decel"

(5). In the display, "accel/decel" (A-2) flashes the word, "service". Select the letter, "L" with the

adjustable knob (1). As a result, appearing in the display "rpm/rcf" (4), are the words, "On Sound".

By pressing the key, "rpm/rcf" (4), the word "On" flashes, and the sound can be switched off with the

adjustable knob (1), (see Figure 5).

After the settings have been stored by user, the normal program mode can be changed back again

by switching off the centrifuge, for a short period.

Figure 5

Z366K_V1.22_eng

PRODUCT DESCRIPTION

Table of Contents