Ruijie RG-SAP845-SP Hardware Installation And Reference Manual page 27

Hardware Installation and Reference Guide
(2) Align the buckle on the back of the master AP with the hole on the mounting plate.
Aligning the AP with the mounting plate
Figure 3-3
Caution
Before buckling the master AP into the mounting plate, install the network cable first.
(3) Push the master AP into the buckle in the opposite direction of the arrow on the mounting plate to
fasten it.
Buckling AP into mounting plate
Figure 3-4
Before buckling the master
AP into the mounting plate,
install the network cable first.
DC power supply
Or PoE power supply
The master AP can face four
directions according to the
actual situation to facilitate
network cable wiring.
19
Installation