Installation Preparation; Safety Recommendations; Universal Safety Recommendations; Moving Safety - Ruijie RG-SAP845-SP Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
2

Installation Preparation

Safety Recommendations

2.1
Note
To avoid injury to human body and equipment, read the safety recommendations in this manual

carefully before installation.
The following safety recommendations may not cover all possible hazardous situations.


Universal Safety Recommendations

2.1.1
High temperature, dust, harmful gas, flammable and explosive factors, electromagnetic interference

(large radar stations, transmitting stations, or substations) and the environment with unstable voltage,
large vibration or strong noise may affect the operating of AP. Do not install the device in such
environment.
It is strictly forbidden to install the device in places prone to water accumulation, seepage, dripping,

or condensation. When performing engineering design, comprehensively consider the factors such as
climate, hydrology, geology, earthquake, electricity, transportation, and select the address that meets
the requirements of communication device engineering environment design according to the
communication network planning and technical requirements.
The installation site should be dry, and it is not recommended to install the device in a place very close

to the sea. The distance between the device and the sea should be greater than 500 meters, and it is
not recommended to place the device on the windward side of the sea.
Do not place the device in walking areas.

During installation and maintenance, do not wear loose clothing, jewelry, or other items that may be

hooked by the chassis.
Keep tools and device away from walking areas.


Moving Safety

2.1.2
Do not move the device frequently.

Turn off all power sources and unplug all power sources and cables before moving or handling the

device.

Electrical Safety

2.1.3
Warning
Irregular and improper electrical operations may cause accidents such as fire or electric shock, and

cause serious or fatal injury to human body and device.
11
Installation Preparation