Checking The Installation Conditions; Installation Tools - Ruijie RG-SAP845-SP Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Ensure that the neutral point of the AC power socket is in good contact with the ground.

To enhance the lightning protection effect of the power supply, consider adding a power lightning

arrester to the input end of the power supply.

Checking the Installation Conditions

2.2.8
The following conditions must be met no matter whether the device is installed on the wall or ceiling:
Ensure that there is space reserved at the air inlets and vents of the device to facilitate the heat

dissipation of the device chassis.
Ensure that the installation site has good ventilation and heat dissipation systems.

Ensure that the installation position is strong enough to support the device and its mounting

accessories.

Installation Tools

2.3
Tool list
Table 2-3
Common tools
Dedicated tools
Meters
Related devices
Note
RG-SAP845-SP does not come with a tool kit, so the tools on the tool list need to be prepared by users.
Phillips screwdriver, related cables, network cables, mounting bolts, diagonal pliers,
and strapping straps
Anti-static gloves, wire strippers, crimping pliers, crystal head crimping pliers, and
wire cutters
Multimeter, bit error tester
PC, display, keyboard
15
Installation Preparation