Page 1
RG-AP180 Access Point Quick Installation Guide Packing List Table 1-1 Packing List Item Name Quantity Unit RG-AP180 Host(Cover:White) RG-AP180 Access PointQuick Installation Guide Copy Product Warranty Copy Philips Flat Head Screw Piece Product lmage LED indicator Figure1-1 Product lmage of RG-AP180...
Page 2
Figure1-3Bottom View of RG-AP180 Note: ① 1000M LAN port (RJ45) Figure1-4 Side View of RG-AP180 Note: ① Console (Micro USB) ② Reset Button (diam:1.2mm) ③ Power Port (Powering the device through the power adapter) Figure1-5 Rear View of RG-AP180 Note:...
Page 3
The LED indicator is inside of top plate cover, and works afteryou power on the device. You can also use the quiet-mode and schedule commands onthe AP or AC device to configure the quiet time range. Table 1-2 Button and LED Indicators on RG-AP180 States Frequency Meaning The AP is NOT receiving power.
Page 4
Installing the RG-AP180 Wireless Access Point A standard USA/EU-style single-gang wall outlet box. You need to buy the mounting bracket, if you mount the AP onan outlet box compliant with US or EU standards. Step 1: Remove the faceplate. (Figure 3-1)
Page 5
Step 3: Install the AP. (Figure 3-3) Step 4: Install the top cover. (Figure 3-4)
Quick Configuration Scene 1: Ruijie Cloud by Mobile APP (Recommended) Part 1: Set up your Ruijie Cloud account Step 1-1: If you do not have a Ruijie Cloud account, you canregister on Ruijie Cloud App or on https://cloud.ruijienetworks.com Ruijie Cloud App Download:...
Page 7
For detailed setup configuration, please refer to the following video: https://www.ruijienetworks.com/support/video-1710 Scene 2: Hardware Controller (Optional) Make sure the access point can obtain an IP from the DHCP server and is reachable to the IP address of controller. For more information, scan the QR- code or access the link below.
Need help?
Do you have a question about the RG-AP180 and is the answer not in the manual?
Questions and answers