Troubleshooting; Safety; Bodyguard - Wacker Neuson AR Operator's Manual

12 Troubleshooting

12.1

Safety

DANGER
Danger to life from own attempts at troubleshooting.

12.2 Table – malfunctions
The following chart shows malfunctions, their possible causes and remedies.
Malfunction
Machine not running.
Control lamp (optional) does
not light up.
*
Must be performed by a Wacker Neuson representative.
12.3

Bodyguard

Malfunction
Indicator light doesn't light up.
Mains voltage is applied.
Indicator light doesn't light up.
Indicator light does not go out with
function testing.
*
Have these tasks carried out by the service department of your Wacker Neuson representative person.
100_0102_ts_0003.fm
Contact the manufacturer if this machine has a malfunction not described in this
manual. Do not attempt to rectify malfunctions yourself.
Possible causes
Power cable defective.
Bearing defective.
Power cable defective.
Control lamp defective.
Machine overheated – caused by
bearing damage.
Fault in current source.
®
Cause
 The Bodyguard® turned off the
machine.
 Machine error.
 Water in the converter.
 Defect in the oscillating body.
No mains voltage.
Bodyguard® defective.
Plug defective.
Indicator light defective.
Test button or Bodyguard®
defective.
12 Troubleshooting
Remedy
Replace power cable if defective.*
Repair machine.*
Replace power cable if defective.*
Repair machine.*
Repair machine.*
Check electric power supply – if
malfunction not corrected, repair
machine.*
Remedy
1. Pull plug out of plug receptacle.
2. Check connection cable for
damages – replace in case of
damage.*
3. Insert plug into plug receptacle.If
the fault is not remedied, have
the machine repaired.*
Have the machine repaired.*
1. Pull plug out of plug receptacle.
Check connection cable for
damages – have machine repaired
in case of damage.*
Have the machine repaired.*
Have the machine repaired.*
30