Transport And Storage; Safety; Transport Preparation; Transporting The Machine - Wacker Neuson AR Operator's Manual

8

Transport and storage

8.1

Safety

WARNING
Incorrect transport
Risk of injury and damage to the machine from incorrect transport.



8.2

Transport preparation

Compliance with the following steps is required before the machine is transported:
1. Switch off machine at the ON/OFF switch.
NOTE
If the machine does not have an ON/OFF switch, it can be switched off using the inverter
ON/OFF switch.
2. Wait until the machine has come to a complete standstill.
3. Disconnect the machine from the electric power supply.
4. Let the machine cool off. Risk of burns!
5. Unscrew machine from formwork or undo from fastening clamp.
8.3

Transporting the machine

Compliance with the following points is required wherever possible to avoid serious injuries or
damage to the machine:
Place machine in a suitable container for transport (e.g. wire mesh collapsible).

Wind up power cable – do not bend power cable.

Secure machine against falling, tipping, and rolling away.

Do not use leads, cables, or safety belts as transport handles.

Do not use leads, cables, or safety belts to secure for transport.

Do not lift machine directly with a crane – use suitable container for transport (e.g. wire mesh

collapsible).
8.4

Storage

The following points must be observed to avoid possible damage to the machine:
Do not store outside.

Store in a dry and dust-free place.

Do not expose to aggressive substances.

Avoid mechanical vibrations.

Oil the places that are prone to rust.

100_0102_tr_0002.fm
Perform all steps in accordance with the specifications of this manual.
Observe notes when transporting machine.
Use personal protective gear.
8 Transport and storage
20