Table of Contents
Advertisement
10 Troubleshooting
Potential faults, their causes and remedies can be found in the following table.
Malfunction
Vibrator head does not vibrate.
Noticeable sound, vibrator head
runs with reduced power.
* Have these tasks carried out by the service department of your Wacker Neuson representative per-
son.
100_0101_ts_0002.fm
Cause
No line voltage.
Vibrator head has switched off
due to excess temperature.
ON/OFF switch defective.
Mechanical defect in the vi-
brator head.
One of the thermal overload
protections has switched off
(two phase operation).
10 Troubleshooting
Remedy
Connect the plug to the in-
verter.
Check power cable for dam-
age, replace if defective.*
Deactivate the machine and al-
low the vibrator head to cool
down.
Have the machine repaired. *
Have the machine repaired. *
23
Advertisement
Table of Contents
