Table of Contents
Advertisement
UM-PM-029
DA9213, DA9214, and DA9215 Performance
Boards
Stop Program
This terminates the program but leaves it inactive on the screen.
6.2
File Load/Save
Load
Load previously saved text files.
Save
Save current panel state to a text file. Selecting the Register Dump option saves the current register
values to the text file, see
Note 1
There is a difference between Save and Register Dump. Save dumps the contents of all panel
controls to the file (a save state operation), while Register Dump reads the device contents (including
status registers) into the file.
6.3
Register Access
This is probably the most important section of the Configuration Panel.
CoPMIC slave
Set the slave address of the device. This affects all I
INTERFACE in the DA9213/4/5 Datasheet [1].
Find
Finds a control matching a full or partial register name, a control bit name, a register number (for
example, R208 or D0h). Pressing Find repetitively steps through all matching items.
Send
Sends single byte data to I
Read
Reads single byte data from I
User Manual
CFR0012
Appendix
A.
2
C device using Slave Address, Register Address, and Data to Send.
2
C device using Slave Address and Register Address.
Revision 2.0
14 of 37
2
C communications. See also the register
25-Feb-2022
© 2022 Renesas Electronics
Advertisement
Table of Contents
