Undoing The Mounting Pin; Drive Adapter Safety Catch; Assembling The Drive Adapter With Safety Catch On The Drive Shaft; Disassembling The Drive Adapter With Safety Catch On The Drive Shaft - Becker P4-30 Assembly And Operating Instructions Manual

Then mount the wall bracket and idler. Ensure that the barrel is aligned at right angles to the wall and that sufficient axial play is al-
lowed for the mounted system.

Undoing the mounting pin

Drive adapter safety catch

Assembling the drive adapter with safety catch on the drive shaft

Disassembling the drive adapter with safety catch on the drive shaft

Disassembly with disassembly tool, Item no. 4930 300 606 0
Disassembly with long nose pliers
Calculate the space required at the side (M) by measuring the drive head (1) and wall
bracket (2). The clear dimension of the box (X) minus the space required at the side
(M) and idler (G) gives the length (L) of the barrel: L=X-M-G.
The space required at the side (M) varies depending on the combination of drive and
wall bracket.
When pushed in, the mounting pin (2) locks automatically. To undo the mounting pin
(2), push the tab washer (1) upwards and pull out the mounting pin (2).
2.
1.
9