Table of Contents
Advertisement
Obstacle detection (for ZIP applications with heavy end strip)
Caution
Obstacle detection is only active in conjunction with the "drive adapter for obstacle detec-
tion".
In addition, please note that the drive must be pushed in to the shaft as far as the band of
the thrust ring.
Use of the drive's obstacle detection system as personal protection is not permitted. It has
been designed exclusively to protect the sun protection system from being damaged.
If the drive is correctly installed, it switches off when it detects obstructions or fabric faults and tries to run past the obstruction a
second time. If this fails, the drive switches off after the third attempt. Approx. 360° from the lower limit position, the drive interrupts
operation immediately following the first detection of an obstacle and makes no further attempt to continue.
The total number of attempts to complete a travel that has been started to the respective limit position is limited to 10 (distributed
over several obstruction locations).
If reversing is interrupted, a further drive command is only possible in the direction of reversing. Move the fabric without interrup-
tion until the tubular drive stops automatically. It is now possible to travel in both directions again.
19
Advertisement
Table of Contents
