Table of Contents
Advertisement
Activating/deactivating the additional fabric untensioning function with the
The "to upper stop" limit position must be set for the fabric untensioning function.
On delivery, the fabric untensioning function is activated.
Activating/deactivating the fabric untensioning function
This product is made of various materials which must be disposed of properly. Find out about the applicable regulations on recyc-
ling or disposal for this product in your country.
The packaging material must be disposed of properly.
These drives are maintenance-free.
Tubular drive
Model
Type
Rated torque [Nm]
Output speed [rpm]
Limit switch range
Supply voltage
Connected load [W]
Rated current consumption [A]
Operating mode
Degree of protection
Min. tube inside diameter [mm]
Frequency
Emission sound pressure level [dB(A)]
master transmitter
Open the shading solution to the upper limit position.
Press the programming button on the master transmitter for approx. 3 seconds.
▻ The tubular drive acknowledges.
Then press the programming button again, and also the STOP and UP buttons for ap-
prox. 3 seconds.
1x
► The tubular drive acknowledges.
Disposal
Maintenance
Technical data dia. 35
P4-30
4
30
110
0.45
P5-20
C18a
C PSOF Z1 A
5
20
64 revolutions
240 V AC / 50 Hz
110
0.45
S2 4 min
IP 44
37
915.3 MHz
≤ 70
P8-16
8
16
110
0.45
21
Advertisement
Table of Contents
