Disassembling The Plug-In Connecting Cable For Tubular Drives Dia. 35 - Becker P4-30 Assembly And Operating Instructions Manual

Disassembling the plug-in connecting cable for tubular drives dia. 35.

Caution
Prior to disassembly, the power supply to the connecting cable must be disconnected.
Insert a suitable flathead screwdriver between the locating lug and the snap-in pin, so that the snap-in pin releases the locating lug
from the plug.
Now you can pull out the connecting cable along with the flathead screwdriver.
dia. 35
A = snap-in pin
A
7