Christie CineLife+ RGB PLF Installation And Setup Manual page 17

ID Component
A Projector lens
B Service access door
C Communications panel
External devices are connected here.
D Exhaust duct connection
E Touch panel
A touch-sensitive screen used to control the projector.
The touch panel is an optional feature on CP4415 and CP4420 projectors. If there is no
touch panel installed, use the Remote UI feature. See Using the Remote UI.
F AC input circuit breaker A
G AC input circuit breaker B
H UPS input
I AC receptacle B
J AC receptacle A
K Liquid cooling supply line connection
L Liquid cooling return line connection
M Communication connection for the chiller
N Adjustable feet
Turn the adjustable feet to increase or decrease the projector height.
CineLife+ RGB PLF Installation and Setup Guide–CP4440-RGB, CP4450-RGB
020-103072-04 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Introduction
17