Chiller Components - Christie CineLife+ RGB PLF Installation And Setup Manual

Chiller components

Learn about the components of the chiller, which is used with CP4440-RGB and CP4450-RGB
projectors.
ID Component
A Coolant hose
B Reservoir fill cap
C Coolant inlet port
D Coolant outlet port
E Exhaust vent
F Communication signal terminal
G Power supply terminal
H Chiller coolant filter
I Coolant drain port
Related information
Setting up the chiller unit (on page 35)
CineLife+ RGB PLF Installation and Setup Guide–CP4440-RGB, CP4450-RGB
020-103072-04 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Introduction
18