Christie CineLife+ RGB PLF Installation And Setup Manual page 40

Table of Contents

3. Connect the coolant lines between the chiller and the projector. To avoid cross-connections, the

supply and return lines have specific male and female quick connectors that connect into the

projector.

a) Connect the open end of the Chiller Outlet hose to the chiller outlet port and tighten the

required worm gear clamp.

b) Attach the Chiller Outlet quick connector (male) to the projector inlet port (female).

c) Connect the open end of the Chiller Inlet hose to the chiller inlet port (at the filter) and

tighten the required worm gear clamp.

d) Attach the Chiller Inlet quick connector (female) to the projector outlet port (male).

CineLife+ RGB PLF Installation and Setup Guide–CP4440-RGB, CP4450-RGB

020-103072-04 Rev. 1 (03-2021)

Installing and setting up

Table of Contents

Cp4440-rgb Cp4450-rgb Cp4455 rgb