Table of Contents
Advertisement
•
Before lifting and positioning the projector, refer to the light intensity hazard distances.
•
To avoid damage to the lens mount when lifting the projector, do not apply the load across the
front of the projector.
1. Using appropriately rated lift equipment, lift up the projector and move it to the location where
it will be used.
2. When lifting, ensure the load is applied only to the structural frame members across two
opposite sides of the projector. The load should never be applied directly to a panel, cover, or
other non-structural component of the projector. The following illustrations show the structural
frame members of the projector:
Lower projector
frame
Right side projector
frame
CineLife+ RGB PLF Installation and Setup Guide–CP4440-RGB, CP4450-RGB
020-103072-04 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Installing and setting up
23
Advertisement
Table of Contents
