Selecting An Input Signal - Christie LWU620i User Manual

Operating

Selecting an input signal

1.
Press INPUT button on the projector.
When you press the button, the projector switches
its input port from the current port as below.
LAN  COMPUTER IN  HDMI 1
VIDEO
SDI*  HDBaseT  DisplayPort
NOTE
• If you have set SKIP to some ports from SOURCE SKIP in the
OPTION menu, the input from the ports cannot be selected (87).
• While ON is selected for AUTO SEARCH item in OPTION menu, the projector
keeps checking the ports in the above order repeatedly until an input signal is
detected (87).
1.
Press COMPUTER 1, VIDEO, LAN, HDMI 1 / 2, DisplayPort, HDBaseT or
SDI button on the remote control.
The port corresponding to each button is selected as below.
Button
COMPUTER 1
COMPUTER 2
VIDEO
LAN
USB TYPE A
USB TYPE B
HDMI 1
HDMI 2
DisplayPort
HDBaseT
SDI
DIGITAL
NOTE
• While ON is selected for AUTO SEARCH item in the OPTION menu,
the projector keeps checking every port sequentially till an input signal is
detected (87).
* LWU720i/LHD720i only
LWU720i/LHD720i/LWU620i
User's Manual - Operating Guide
HDMI 2
Ports
COMPUTER IN
-
VIDEO
LAN
-
-
HDMI 1
HDMI 2
DisplayPort
HDBaseT
SDI*
-
38
SHUTTER
INPUT button
Buttons for input
ports
020-001279-01 Rev. 1 (10-2017)