Table of Contents
Advertisement
10. Using the four screws, re-attach the knockout plate and ensure the appropriate strain relief is
in place.
11. Using the six captive screws, reinstall the rear cover of the projector.
Connecting to an uninterruptible power supply
An uninterruptible power supply (UPS) allows the cinema projector head electronics to remain
operable during a power failure.
Warning! If not avoided, the following could result in death or serious injury.
•
SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.
The following table lists the part numbers for the optional UPS power cords for each region.
Power Cord Description
North America 125V/15A
Japan 125V/12A
China 250V/10A
UK 250V/10A
EU/Korea 250V/10A
Australia 250V/10A
South Africa 250V/10A
1. If installed, remove the projector touch panel.
2. Remove the rear cover of the projector by unscrewing the 6 captive screws.
3. Behind the MAIN input circuit breaker, disconnect the MAIN input plug from the top power
supply.
A
UPS input plug
B
MAIN input plug
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB
020-103244-04 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Part Number
108-382104-XX
108-371102-XX
108-373104-XX
108-388100-XX
108-390103-XX
108-392105-XX
108-487100-XX
Installing and setting up
23
Advertisement
Table of Contents
