Menus And Sub-Menus On The Machine Control; Direct Menus (Direct Access To Parameters); Expert Menu (Tig) - EWM Tetrix 352 AC/DC SYNERGIC PL. AW GR Operating Instructions Manual
Power sources for automated applications
Hide thumbs
Also See for Tetrix 352 AC/DC SYNERGIC PL. AW GR:
- Operating instructions manual (53 pages) ,
- Operating instructions manual (92 pages)
Table of Contents
Advertisement
5.23
Menus and sub-menus on the machine control
5.23.1 Direct menus (direct access to parameters)
Functions, parameters and their values can be accessed directly, e.g. can be selected by pressing a
button once.
5.23.2 Expert menu (TIG)
ENTER (enter the menu)
•
Keep the "welding parameters" button pressed for 4 s.
Navigating in the menu
•
Parameters are selected by pressing the "welding parameters" button.
•
Set or change the parameters by turning the "welding parameter setting" rotary dial.
EXIT (leave the menu)
•
After 4 s, the machine will return automatically to the ready-to-operate status.
The expert menu includes functions and parameters which are either not set on the machine control, or
which do not require regular setting.
ENTER
4 s
099-003133-SCO01
07.04.2014
NOTE
EXIT
4 s
Figure 5-30
Design and function
Menus and sub-menus on the machine control
NAVIGATION
79
Advertisement
Table of Contents
Need help?
Do you have a question about the Tetrix 352 AC/DC SYNERGIC PL. AW GR and is the answer not in the manual?
Questions and answers