Power Source For Hot Wire Welding; Machine Cooling - EWM Tetrix 352 AC/DC SYNERGIC PL. AW GR Operating Instructions Manual
Power sources for automated applications
Hide thumbs
Also See for Tetrix 352 AC/DC SYNERGIC PL. AW GR:
- Operating instructions manual (53 pages) ,
- Operating instructions manual (92 pages)
Table of Contents
Advertisement
Design and function
Machine cooling
5.3.1
Power source for hot wire welding
Item Symbol
1
2
3
4
5.4
Machine cooling
To obtain an optimal duty cycle from the power components, the following precautions should be
observed:
•
Ensure that the working area is adequately ventilated.
•
Do not obstruct the air inlets and outlets of the machine.
•
Do not allow metal parts, dust or other objects to get into the machine.
36
Description
0
Carrier platform for hot wire power source
Front holder
Push the hot wire power source with the machine feet into the holder
Rear holder
To fix, push the holder into the machine feet and
secure with fixing screws.
Fixing screws (x 4)
Figure 5-2
099-003133-SCO01
07.04.2014
Advertisement
Table of Contents
Need help?
Do you have a question about the Tetrix 352 AC/DC SYNERGIC PL. AW GR and is the answer not in the manual?
Questions and answers