EWM Tetrix 352 AC/DC SYNERGIC PL. AW GR Operating Instructions Manual page 21

Item Symbol
4
5
6
7
8
099-003133-SCO01
07.04.2014
Machine description – quick overview
Description 0
Function sequence (see next chapter)
Status displays
After each completed welding task, the last values used in the welding
process for the welding current and welding voltage are shown on the
displays, and the signal light will be on
Direct current welding
Alternating current welding
and simultaneously: Alternating current welding, AC special
Welding parameter setting rotary transducer
Setting of all parameters such as welding current, sheet metal thickness, gas pre-flow
time, etc.
Three-figure LED display
Welding parameter display (see also chap. "Welding data display").
Display switching button
Material thickness display
VOLT Welding voltage display
JOB JOB number display
PROG Program number display
Machine control (Mode RC - on)
21