EWM Tetrix 352 AC/DC SYNERGIC PL. AW GR Operating Instructions Manual page 32

Design and function
General
Damage due to incorrect connection!
Accessory components and the power source itself can be damaged by incorrect
connection!
•
Only insert and lock accessory components into the relevant connection socket when the
machine is switched off.
•
Comprehensive descriptions can be found in the operating instructions for the relevant
accessory components.
•
Accessory components are detected automatically after the power source is switched on.
Using protective dust caps!
Protective dust caps protect the connection sockets and therefore the machine against
dirt and damage.
•
The protective dust cap must be fitted if there is no accessory component being operated
on that connection.
•
The cap must be replaced if faulty or if lost!
Observe documentation of other system components when connecting!
32
CAUTION
NOTE
099-003133-SCO01
07.04.2014