Hitachi EX20UR-2 Manual page 272

7. Disconnect two cylinder hoses (2) from bucket cyl-
inder (1). Put plugs (3) on hose and piping open-
ings.
6. Put wire (2) through rod (1) hole and tie it to cylin-
der tube (3) so that cylinder rod (1) will not extend.
W507-04-02-005
FRONT ATTACHMENT/ Cylinder
A
CAUTION: Links (2), (3) may move suddenly as
they are disconnected from the rod,
resulting in personal injury. Be
careful when removing pin (1).
5. Remove pin (1) to disconnect links (2), (3) from the
rod.
W507-04-02-004
4. Remove pin securing bolt (1) on the rod side.
W507-04-02-006 ',
W04-02-02